Portrable H FABP Rapid Test Blood Specimen 4mm Strip 5 Mins Reading Time

One Step H-FABP Rapid cardiac blood Tests, gold colloidal method, diagnosis of acute myocardial infarction (AMI)

Intended Use:

The H-FABP Rapid Test Cassette (Whole Blood/Serum/Plasma) is a rapid chromatographic immunoassay for the qualitative detection of human H-FABP in whole blood, serum or plasma as an aid in the diagnosis of acute myocardial infarction (AMI).

Summary:

FABP is a newly introduced plasma marker of acute myocardial infarction (AMI). The plasma kinetics of FABP (15 kD) closely resemble those of myoglobin in that elevated plasma concentrations are found within 2 hours after AMI and return to normal generally within 18 to 24 hours. But the concentration of FABP in the skeletal muscle is 20 times lower than in cardiac tissue (for myoglobin the same content for cardiac and skeletal tissue), that makes FABP to be more cardiac specific than myoglobin. This makes FABP a useful biochemical marker for the early assessment or exclusion of AMI. FABP also appears to be a useful plasma marker for the estimation of myocardial infarct size. FABP is suitable for use as a standard in immunoassay for early detection of acute myocardial infarction, immunogen for antisera production, mass FABP standard, FABP biochemical and immunochemical studies, tracer for iodination.

Test Principle:

The H-FABP Rapid Test Cassette (Whole Blood/Serum/Plasma) is a qualitative, membrane based immunoassay for the detection of Heart-type Fatty Acid-Binding Protein (H-FABP) in whole blood, serum or plasma. In this test procedure, capture reagent is immobilized in the test line region of the test. After specimen is added to the specimen area of the cassette, it reacts with anti-H-FABP antibody coated colloid gold particles in the test. This mixture migrates chromatographically along the length of the test and interacts with the immobilized capture reagent. The test format can detect H-FABP in specimens. If the specimen contains Heart-type Fatty Acid-Binding Protein (H-FABP), a colored line will appear in the test line region, indicating a positive result. If the specimen does not contain Heart-type Fatty Acid-Binding Protein (H-FABP), a colored line will not appear in this region, indicating a negative result. To serve as a procedural control, a colored line will always appear in the control line region, indicating that proper volume of specimen has been added and membrane wicking has occurred.

TEST PROCEDURE

1. Bring the pouched test device to room temperature(15-30℃) prior to testing. Do not open the pouch until ready

to begin testing.

2. Remove the device from the sealed pouch and lay it on a flat and dry surface.

3. Using the provided pipette, add one drop of fresh specimen to the sample well.

4. Hold the buffer bottle vertically and add 1 drop to the sample well. /If using a pipette, change a new one to avoid

cross-contamination. Draw and transfer 2-3 drops of buffer to the sample well.

5. Read the result between 15-20minutes. Do not read results after 20 minutes.

INTERPRETATION OF RESULTS

POSITIVE:* Two lines appear. One colored line should be in the control line region (C) and another apparent colored line should be in the test line region (T).

*NOTE: The intensity of the color in the test line region (T) will vary depending on the concentration of TP antibodies present in the specimen. Therefore, any shade of color in the test line region (T) should be considered positive.

NEGATIVE: One colored line appears in the control line region (C). No line appears in the test line region (T).

INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.