Open Surgery Polymer Surgical Ligating Clip , OEM Clip Applier Surgery

Open Surgery Polymer Surgical Ligating Clip Applier

Description

Open Ligating Clip Appliers are designed for use as delivery devices for Polymer Ligating Clips. Clip appliers are reusable instruments that manually load and deliver one clip at a time.

Open Clip Removers are used as a removal device for Polymer Ligating Clips. The removers are manufactured from stainless steel. Other ligating clips can not be used with these practitioners.

Mannual

• Always check applicator’s mouth alignment before using.
• When closed, the ends of the mouths should be aligned and aligned with each other.It is very important to align the mouth for safe application of the clip. If this is not done, the patient may be harmed. Regular maintanence , care and cleaning are required to ensure proper functionally.
• This applier is NOT designed for use with an operative cannula fort he purposes of maintaning pneumoperitoneum. Proceed carefully when inserting the instrument through cannula. Do NOT apply lateral pressure on the applier as damage to the working tip may occur.
• Before use, examine the instrument for bent,broken,cracked or worn parts. In order to avoid unnecessary gas loss, ensure the cleaning port cap fits tigthly on the Luer – Lock flush port. A spare cap is provided for your convenience.
• Always confirm that the clips remains in the applier after insertion of the applier and clip through a cannula. Do not attempt to close the jaws on a vessel or anatomic strucuture without a clip properly loaded into the jaws.Closure of empty jaws on a vessel or anatomic structure may result in patient injury.
• Rotation knob should only be avtivated with jaws in open position. Failure to do this may result in damage to the applier.

Loading Instructions

1. Pay attention to colour-coding. Choose the proper applier corresponding in colour with the clips cartridge. The colour indicates the clip size.

2. Use the proper grip of the clip applier.Applier jaws should to be positioned perpendicularly to the cartridge body.

3. Note that the applier jaws must enter the cartridge simultaneously.Properly position the triangular marker situated on the side of the cartridge to ensure good visibility of the clip during application.

4. Verify that the clip loading/seating is correct .

Key features

Available for Medium, Medium-Large, Large and Extra- Large non-absorbable clips to be used on large spectrum of tissue sizes

20cm, 27cm and 27cm 70° angled clip appliers with proper sized jaws

Non-detachable design for easier maintenance and durability

Made of high quality stainless steel

Colour coded rings matching cartridge hue

Compatible with corresponding sizes of polymer non-absorbable clips